Features
- D-Sub mixed contact connectors allowing signal and power transfer within one connector
- Available in industry-standard contact configurations - 3W3 | 5W1 | 5W5 | 7W2
- All contacts are pre-loaded into the insulator
- Options include solder cup, vertical and right-angle solder pin terminations
- Power contacts rated for 20 or 40-amp depending on requirement, signal contacts rated for 5-amp
Specifications
| Insulator material: | Thermoplastic Polyester, UL 94V-0, Black |
| Contact material & plating: | Copper Alloy, Gold Flash All Over |
| Shell material & plating: | Steel, Nickel Plated |
| Current rating (power contacts): | 20A, 40A |
| Current rating (signal contacts): | 5A |
| Working voltage rating: | 240V |
| Contact resistance (power contacts): | 1 mΩ MAX. |
| Contact resistance (signal contacts): | 10 mΩ MAX. |
| Insulator resistance: | 5 GΩ MIN. |
| Dielectric withstand voltage: | 1000 VAC RMS at sea level |
| Operating temperature: | -55°C to +125°C |
| Mating cycles: | 50 |
Combo D-Sub range; power and signal single connectors.
Loading Parts
Part # |
Configuration |
Type |
Power (Amps) |
Termination |
Drawing |
Order Samples |
|
|---|---|---|---|---|---|---|---|
|
MHCDS7W2P4 | 7W2 | Plug | 40 | Vertical solder cup |
